Application:

• Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty’s Drivetrain Degreaser
• Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all)
• Remove as much water as you can from the chain – a quick wipe with a clean cloth will do fine
• Give the bottle a good shake to evenly distribute the secret sauce
• Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered
• Keep cycling the chain for 10seconds or so to help the lube work its way into your chain
• Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions)

Tips:

• For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection
• On first use with pre-used chains, you may find that your chain turns black – this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more! Caution – Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.